Water Filtration and Purification Equipment Supplier
Reverse Osmosis System Parts and Supplier
Commercial and Residential Wave Cyber DI & Pressure Tanks Supplier
Water Filtration Manufacturer Distributor Vendor Water Purification
Vontron RO Nanofiltration Ultrafiltration Membrane Distributor
Strengthened RO Membrane
Fouling Resistant Reverse Osmosis Membrane Element
The FR series RO membrane elements are commonly used in ultrapure water production, seawater desalination, medical and food processing. However, the reverse osmosis membrane's performance in seawater desalination and purification systems is often significantly reduced due to fouling and contamination. To address this, a fouling resistant reverse osmosis membrane was developed using a special membrane sheet during the manufacturing process. This particular RO membrane type features an improved hydrophilicity, permeability and fouling resistance due to the use of a membrane surface modified technology. This surface modified technology effectively reduces the breeding of biofouling and adsorption of pollutants in the membrane surface. The RO element is designed with a special 34 mil spacer design, which effectively reduces fouling and pressure drops, greatly enhancing the membrane longevity.
Fouling Resistant: PURO Series
The PURO series is an upgraded fouling resistant RO element. Based on the FR series, the polymerization of aromatic polyamides degree and the separation layer thickness are increased. A special 34 mil feeding channel design is also used, further improving the rejection rate, reducing pressure drops and enhancing the element firmness during cleaning.
The PURO-LE series is an energy-saving fouling resistant RO element. Under the same conditions, the operating pressure is reduced by more than 25% to save energy without sacrificing performance.
Introduction
-
PURO I- membrane elements are more pollution-resistant and more resilient to a wide range of chemical cleaning than to it's improved cross-link strength of Polyamide desalination layer.
-
PURO II - membrane elements have higher endurance to chemical cleaning and higher fouling resistance owing to the brand-new design of feed channel spacer with low pressure differentials.
-
PURO-FRLE - an ultra-low pressure RO membrane, has the features of fouling resistance and low energy consumption, and is applicable to the treatment of industrial sewage with low salinity, such as electronic sewage and surface water.
Application
The FR and PURO series of fouling resistant membranes normally suitable for treatment of complex water source with TDS less than 10000 ppm. It is mainly used for purification of surface water, mining waste water, municipal reclaimed water, industrial waste water, RO brackish water, etc.
Active Membrane Area ft2(m²): 400 (37.2)
Permeate Flow Rate GPD (m³/d): 10500 (39.7)
Stabilized Rejection Rate (%): 99.7
Operating Pressure: 225 psi (1.55MPa)
Active Membrane Area ft2(m²): 400 (37.2)
Permeate Flow Rate GPD (m³/d): 10000 (37.8)
Stabilized Rejection Rate (%): 99.6
Operating Pressure: 150 psi (1.03MPa)
Active Membrane Area ft2(m²): 400 (37.2)
Permeate Flow Rate GPD (m³/d): 10500 (39.7)
Stabilized Rejection Rate (%): 99.75
Operating Pressure: 225 psi (1.55MPa)
LP Reverse Osmosis Membrane Element, Low Pressure RO Membrane
This low-pressure RO element is specially designed for producing high quality water from tap or brackish water in small commercial RO systems. It features a low-pressure during operation, a high permeate flow and an outstanding rejection performance for removing solvable salts, TOC, SiO2, and more. It is also ideal for the preparation of exceptionally pure water for use in the electronics and power industries. Use of these low energy membranes in commercial RO systems allows for a significantly reduced operation costs, and with an extensive RO membrane application range in reverse osmosis systems and water filtration systems around the world, VONTRON's RO membrane elements feature an outstanding reputation thanks to their high quality, excellent reliability and long service life. We are an excellent choice for reverse osmosis system core components.
Low Pressure: LP Series
Low pressure reverse osmosis membrane elements are traditionally used for treatment of brackish water, surface water, underground water, and municipal water with TDS readings of less than 10000 ppm. They are mainly used for the production of bottled water, drinking water, industrial use pure water, high purity water, and boiler replenishment water in different scale amounts, as well as applications in wastewater reuse, material concentration, purification and refining purposes.
Introduction
LP400-LD and ULP400-LD membrane elements adopt LD 34mil feed spacer to improve the liquid turbulence on the surface of membrane, thus reducing the risk of colloid congestion and the frequency of cleaning.
Application
LP series is normally suitable for treatment of brackish water, surface water, underground water and municipal water with TDS is less than 10000 ppm. It is mainly used for producing various scales of bottle water, drinking water, industrial used pure water, high purity water, boiler replenishment water, also for wastewater reuse, material concentration, purification and refining purposes.
Model: LP400-LD
Active Membrane Area ft2(m²): 400 (37.2)
Permeate Flow Rate GPD (m³/d): 10500 (39.7)
Stabilized Rejection Rate (%): 99.7
Operating Pressure: 225 psi (1.55MPa)
Model: LP440-MAX
Active Membrane Area ft2(m²): 440 (40.9)
Permeate Flow Rate GPD (m³/d): 12500 (47.3)
Stabilized Rejection Rate (%): 99.7
Operating Pressure: 225 psi (1.55MPa)
ULP Reverse Osmosis Membrane Element, Ultra-Low Pressure RO Membrane
The ultra-low-pressure membrane is especially suited for use in water and municipal water treatment systems. This RO membrane element operates at extremely low pressures while simultaneously providing a high performance and reducing operation costs. Designed with an outstanding quality and top performance, the reverse osmosis membranes feature a high rejection rate of up to 99.5% and a high flux at low working pressures. Equipped with the low-pressure RO membranes, RO system operation costs are significantly reduced.
Ultra Low Pressure: ULP Series
The ULP series RO element is widely used for the treatment of surface water, underground water, and municipal water with TDS readings of less than 2000 ppm. This functional reverse osmosis membrane element is primarily used in bottled water, drinking water, boiler replenishment water, ultrapure water, process water, etc.
Introduction
ULP440-MAX and LP440-MAX membrane elements can increase permeate flow by 15% and 20% respectively, while maintaining the required rejection rate. PURO-I membrane elements are more pollution-resistant and more resilient to a wide range of chemical cleaning than to its improved cross-link strength of Polyamide desalination layer.
Application
ULP series RO element normally suitable for treatment of surface water, underground water and municipal water with TDS is less than 2000 ppm. It is mainly applied in bottle water, drinking water, boiler replenishment water, food processing and pharmaceutical manufacturing industries and other fields.
