SLV Series Order Form
SLV SERIES
SLV 3/2-WAY DIRECT ACTING SOLENOID VALVE
SLV Series 3/2-Way Direct Acting Solenoid Valve
SLV1 • Normally Closed
SLV2 • Normally Open
SLV3 • Diverting
SLV4 • Universal
SLV5 • Free Exhaust
Normally Closed
External Dimensions Chart
Normally Closed
Normally Open
Normally Open
Diverting
Diverting
Universal
Universal
Free Exhaust
Free Exhaust
SLT Series Order Form
Item and External Dimensions Chart
SLT1 Normally Closed
SLT1 Normally Closed
SLT2 Normally Open
SLT2 Normally Open
SLT3 Universal
SLT3 Universal
SLT4 Diverting
SLT4 Diverting
SLT Series Order Form
Item and External Dimensions Chart
SLT SERIES
SLT 3/2-WAY PILOT OPERATED SOLENOID VALVE
-
SLT series 3-Way solenoid valve feature pilot diaphragm construction together with a high flow rate. This valve is highly resistant to dust, water deposits and other foreign matter. Capable of working at minimal differential pressures.
-
This valve have normally closed & normally open type
-
Seals: NBR, VITON, EPDM
-
Body Material: Brass
-
Fluid Media: Air, Water, Etc.
-
Working Pressure: 0.5~10kgf/cm²
-
Working Pressure: 0~65°C; Fluid Temp.:0~120°C
-
Coil can fix SM Coil
SLT Normally Closed
SLT Normally Open
SLT Series Order Form
Item and External Dimensions Chart
-
2/2 Normally Closed Type: P is the entrance, A is for the exit, and R is blocked.
-
2/2 Normally Open Type: R is the entrance, A is for the exit, and P is blocked.
-
3/2, 1 in and 2 out of flow type: A is the entrance, P and R are exported.
-
3/2,2, 1 out of the confluence type: P and R are for entrance, and A is for the exit.
-
3/2 Normally Closed Type: P is pressure port, A is for outlet, R is the exhaust port.
-
3/2 Normally Open Type: R is the pressure port, A is the outlet, P is the outlet.
SLT SERIES
SLT 3/2-WAY DIRECT ACTING SOLENOID VALVE • UNIVERSAL
-
Seal Material: NBR, EPDM, VITON
-
Valve Body: Brass
-
Seals: NBR, VITON, EPDM
-
Fluid Media: Air, Water, Etc.
-
Fluid Temp.:0~80°C
-
Ambient Temp.: -10~+60°C
-
Pressure: 0~20Bar
-
Voltage: AC220V, DC24V ± 10% Voltage tolerance
-
Installation: The actuator can only be installed vertically upwards
SLC SERIES
SLC SERIES WATER DISPENSER PLASTIC SOLENOID VALVE • NORMALLY CLOSED
SLC Water Valve
2-Way Normally Closed, 1/8' & 1/4" Pipe Size, Plastic Valve Body
SLC1
SLC2
Specification
Using
Characteristics
Component Material
Construction, External Dimensions Chart
SLC5~6
Technical Parameter
No product
SLT Series
Valve Series: SLT
Function: 3/2-Way Direct Acting Universal
Seal Material: NBR/EPDM/VITON
Body Material: Brass
Pipe Size: 1/4"~ 1 1/2"
Orifice: 6 ~ 32mm
CV Factor: 0.8 ~ 32
SLC SERIES
SLC SERIES WATER DISPENSER PLASTIC SOLENOID VALVE • NORMALLY CLOSED
SLC Water Valve
2-Way Normally Closed, Plastic Solenoid Valve
SLC3
SLC4
Characteristic
Specification
Using
Characteristics
Voltage Tolerance
Component Material
Technical Parameter
Construction, External Dimensions Chart
No product
SLT Series
Valve Series: SLT
Function: 3/2-Way Direct Acting Universal
Seal Material: NBR/EPDM/VITON
Body Material: Brass
Pipe Size: 1/4"~ 1 1/2"
Orifice: 6 ~ 32mm
CV Factor: 0.8 ~ 32
SLC SERIES
SLC SERIES WATER DISPENSER PLASTIC SOLENOID VALVE • NORMALLY CLOSED
Specification
Using
SLC10
Characteristics
Component Material
Construction, External Dimensions Chart
Technical Parameter
No product
SLT Series
Valve Series: SLT
Function: 3/2-Way Direct Acting Universal
Seal Material: NBR/EPDM/VITON
Body Material: Brass
Pipe Size: 1/4"~ 1 1/2"
Orifice: 6 ~ 32mm
CV Factor: 0.8 ~ 32
SLC SERIES
SLC SERIES INLET PLASTIC SOLENOID VALVE • NORMALLY CLOSED
-
Fluid Media: Water
-
Voltage: DC 12V, DC24V±10% Voltage tolerance: 5.6W
-
Fluid Temperature: 0~80°C
-
Ambient Temperature: -10%~+60°C
-
Working Pressure: 0.2~8.0bar
-
Life Cycle: More than 10000
-
Connection: NPT 1/4" (PP quick connect 6.35mm)
-
Material: POM (PP Option)
-
Seal Material: EPDM
-
Mounting Distance 25x25mm
This series solenoid valve is used for
RO Machines and Coffee Machines
SLC9
SLC8
Construction, External Dimensions Chart
Technical Parameter
No product
SLT Series
Valve Series: SLT
Function: 3/2-Way Direct Acting Universal
Seal Material: NBR/EPDM/VITON
Body Material: Brass
Pipe Size: 1/4"~ 1 1/2"
Orifice: 6 ~ 32mm
CV Factor: 0.8 ~ 32
SLC SERIES
SLC SERIES INLET PLASTIC SOLENOID VALVE • NORMALLY CLOSED
This series solenoid valve is used for
RO Machines and Coffee Machines
-
Fluid Media: Water
-
Voltage: DC 12V, DC24V±10% Voltage tolerance: 5.6W
-
Fluid Temperature: 0~80°C
-
Ambient Temperature: -10%~+60°C
-
Working Pressure: 0.2~8.0bar
-
Life Cycle: More than 10000
-
Connection: 3/8" (PP quick connect 9.5mm)
-
Material: POM (PP Option)
-
Seal Material: EPDM
-
Mounting Distance 25x25mm
SLC15
Construction, External Dimensions Chart
Technical Parameter
No product
SLT Series
Valve Series: SLT
Function: 3/2-Way Direct Acting Universal
Seal Material: NBR/EPDM/VITON
Body Material: Brass
Pipe Size: 1/4"~ 1 1/2"
Orifice: 6 ~ 32mm
CV Factor: 0.8 ~ 32
SLC SERIES
SLC SERIES INLET PLASTIC SOLENOID VALVE • NORMALLY CLOSED
This series solenoid valve is used for
RO Machines and Coffee Machines
-
Fluid Media: Water
-
Voltage: DC 12V, DC24V±10% Voltage tolerance: 5.6W
-
Fluid Temperature: 0~80°C
-
Ambient Temperature: -10%~+60°C
-
Working Pressure: 0.2~8.0bar
-
Life Cycle: More than 10000
-
Connection: NPT 3/8", NPT 1/2"
-
Material: POM (PP Option)
-
Seal Material: EPDM
-
Mounting Distance 25x25mm
SLC16-17
Construction, External Dimensions Chart
Technical Parameter
No product
SLT Series
Valve Series: SLT
Function: 3/2-Way Direct Acting Universal
Seal Material: NBR/EPDM/VITON
Body Material: Brass
Pipe Size: 1/4"~ 1 1/2"
Orifice: 6 ~ 32mm
CV Factor: 0.8 ~ 32
SLC SERIES
SLC SERIES INLET PLASTIC SOLENOID VALVE • NORMALLY CLOSED
This series solenoid valve is used for
RO Machines and Coffee Machines
-
Fluid Media: Water
-
Voltage: DC 12V, DC24V±10% Voltage tolerance: 5.6W
-
Fluid Temperature: 0~80°C
-
Ambient Temperature: -10%~+60°C
-
Working Pressure: 0.2~8.0bar
-
Life Cycle: More than 10000
-
Connection: G 3/8", G 1/2"
-
Material: POM (PP Option)
-
Seal Material: EPDM
-
Mounting Distance 25x25mm
SLC18-19
Construction, External Dimensions Chart
Technical Parameter
No product
SLT Series
Valve Series: SLT
Function: 3/2-Way Direct Acting Universal
Seal Material: NBR/EPDM/VITON
Body Material: Brass
Pipe Size: 1/4"~ 1 1/2"
Orifice: 6 ~ 32mm
CV Factor: 0.8 ~ 32
SLC SERIES
SLC SERIES OUTLET PLASTIC SOLENOID VALVE • NORMALLY CLOSED
This series solenoid valve is used for
RO Machines and Coffee Machines
-
Fluid Media: Water
-
Voltage: DC 12V, DC24V±10% Voltage tolerance: 8.5W
-
Fluid Temperature: 0~100°C
-
Ambient Temperature: -10%~+60°C
-
Working Pressure: 0~0.5PSI
-
Life Cycle: More than 10000
-
Material: PES
-
Seal Material: Silicon
SLC12
Construction, External Dimensions Chart
Technical Parameter
No product
SLT Series
Valve Series: SLT
Function: 3/2-Way Direct Acting Universal
Seal Material: NBR/EPDM/VITON
Body Material: Brass
Pipe Size: 1/4"~ 1 1/2"
Orifice: 6 ~ 32mm
CV Factor: 0.8 ~ 32
SLC SERIES
SLC SERIES OUTLET PLASTIC SOLENOID VALVE • NORMALLY CLOSED
This series solenoid valve is used for
RO Machines and Coffee Machines
-
Fluid Media: Water
-
Voltage: DC 12V, DC24V±10% Voltage tolerance: 8.5W
-
Fluid Temperature: 0~100°C
-
Ambient Temperature: -10%~+60°C
-
Working Pressure: 0~0.5PSI
-
Life Cycle: More than 10000
-
Material: POM (PP Opetion)
-
Seal Material: Silicon
SLC13
Construction, External Dimensions Chart
Technical Parameter
No product
SLT Series
Valve Series: SLT
Function: 3/2-Way Direct Acting Universal
Seal Material: NBR/EPDM/VITON
Body Material: Brass
Pipe Size: 1/4"~ 1 1/2"
Orifice: 6 ~ 32mm
CV Factor: 0.8 ~ 32
SLC SERIES
SLC SERIES WASTE WATER PLASTIC SOLENOID VALVE • NORMALLY CLOSED
This series solenoid valve is used for
RO Machines and Coffee Machines
-
Fluid Media: Water
-
Voltage: DC 12V, DC24V±10% Voltage tolerance: 5.6W
-
Fluid Temperature: 0~80°C
-
Ambient Temperature: -10%~+60°C
-
Working Pressure: 0.2~8.0bar
-
Life Cycle: More than 10000
-
Material: POM (PP Opetion)
-
Seal Material: EPDM
SLC14
Construction, External Dimensions Chart
Technical Parameter
Flow Characteristics
No product
SLT Series
Valve Series: SLT
Function: 3/2-Way Direct Acting Universal
Seal Material: NBR/EPDM/VITON
Body Material: Brass
Pipe Size: 1/4"~ 1 1/2"
Orifice: 6 ~ 32mm
CV Factor: 0.8 ~ 32
2W SERIES
2W 2/2-WAY DIRECT ACTING SOLENOID VALVE
Specifications
External Dimensions Chart
Technical Parameter
Fluid Flow Chart
2W SERIES
2W 2/2-WAY DIRECT ACTING SOLENOID VALVE
Specifications
External Dimensions Chart
Technical Parameter (Female Thread)
2W SERIES
2W 2/2-WAY DIRECT ACTING SOLENOID VALVE
2W SERIES
2W 2/2-WAY DIRECT ACTING SOLENOID VALVE • NORMALLY CLOSED • FLANGE
Specifications
External Dimensions Chart
Inapplicable Fluids
Fluids that will turn to liquid after being heated and
become solid after being cooled
Strong Corrosive fluids
Fluids that have kinematic viscosity over 20 CST
2W SERIES
2W 2/2-WAY DIRECT ACTING SOLENOID VALVE
2W SERIES
2W 2/2-WAY DIRECT ACTING SOLENOID VALVE • NORMALLY OPEN • BRASS
Characteristics
Normally Open, open when de-energized,
Closed when energized
Body material; forged brass
They are capable of operating at zero differential pressure
Available voltage: AC110v/220v 50/60Hz DC24v
Voltage tolerance: +10% to -10% applicable voltage
Specifications
External Dimensions Chart
Technical Parameter
Inapplicable Fluids
Fluids that will turn to liquid after being heated and
become solid after being cooled
Strong Corrosive fluids
Fluids that have kinematic viscosity over 20 CST
2W SERIES
2W 2/2-WAY DIRECT ACTING SOLENOID VALVE
2W SERIES
2W 2/2-WAY DIRECT ACTING SOLENOID VALVE • NORMALLY OPEN • SST
Characteristics
Normally Open, open when de-energized,
Closed when energized
Body material; SST
They are capable of operating at zero differential pressure
Available voltage: AC110v/220v 50/60Hz DC24v
Voltage tolerance: +10% to -10% applicable voltage
Specifications
External Dimensions Chart
Technical Parameter
2W SERIES
2W 2/2-WAY DIRECT ACTING SOLENOID VALVE
2W SERIES
2W 2/2-WAY DIRECT ACTING SOLENOID VALVE • NORMALLY OPEN • FLANGE
Specifications
External Dimensions Chart
DF SERIES
DF PILOT OPERATED LIQUID SOLENOID VALVE
Specification
-
Max operation pressure: 8bar
-
Operating pressure differential: 0.3~8bar ( Φ3, Φ5 Direct Acting 0~6bar )
-
Ambient temperature: -10°C~50°C
-
Fluid media temperature: 0°C~75°C
-
Voltage: AC:380V; 220V; 36V/50Hz DC: 12V; 24v; 110V; 220V
-
Insulation class: F Class
-
Power consumption: Φ5~Φ20 12w Φ25~Φ100 15w Φ125~Φ150 30w
-
Coil temperature rising: -15% ~ 10%
-
Coil temperature rising: +10 to -10% applicable voltage
-
Fluid media: liquids, air, light oil <20CST
-
Mounting position: flow as narrow, solenoid vertical and upright direction
-
Response time: Φ3~Φ50≤1s Closed≤2s; Φ65~Φ150≤3s Closed≤5s
DF SERIES
DF PILOT OPERATED LIQUID SOLENOID VALVE
Parameters
External Dimensions Chart
DF SERIES
DF SERIES PILOT OPERATED LIQUID SOLENOID VALVE
DF SERIES
DF PILOT OPERATED LIQUID SOLENOID VALVE • FLANGE
Specifications
External Dimensions Chart
ZQDF SERIES
ZQDF GENERAL USE SERIES SOLENOID VALVE
Specification
-
Max operation pressure: 8bar
-
Working pressure: 0~8bar
-
Fluid media: fluid, air, steam, and light oil <20CST
-
Fluid temp: ≤180°C
-
Voltage: AC:380V; 220V; 36V/50Hz DC: 12V; 24v
-
Coil class: Class H
-
Voltage tolerance: -15% + 10%
-
Power consumption: 50w
-
Response time: Open ≤2s, Closed ≤3s
-
Mounting position: flow as narrow, solenoid vertical and upright direction
ZQDF SERIES
ZQDF GENERAL USE SERIES SOLENOID VALVE • NORMALLY CLOSED • BRASS
Parameters
External Dimensions Chart
ZQDF SERIES
ZQDF GENERAL USE SERIES SOLENOID VALVE
Specification
-
Max operation pressure: 8bar
-
Working pressure: 0~8bar
-
Fluid media: fluid, air, steam, and light oil <20CST
-
Fluid temp: ≤180°C
-
Voltage: AC:380V; 220V; 36V/50Hz DC: 12V; 24v
-
Coil class: Class H
-
Voltage tolerance: -15% + 10%
-
Power consumption: 50w
-
Response time: Open ≤2s, Closed ≤3s
-
Mounting position: flow as narrow, solenoid vertical and upright direction
ZQDF SERIES
ZQDF GENERAL USE SERIES SOLENOID VALVE • NORMALLY CLOSED • SST
Parameters
External Dimensions Chart
ZQDF SERIES
ZQDF GENERAL USE SERIES SOLENOID VALVE
Specification
-
Body Material: Brass / SS304
-
Working pressure: 0~8bar
-
Media: Liquid, Gas, Steam, Oil <20CST
-
Voltage: AC:380V; 220V; 36V/50Hz DC: 12V; 24v
-
Coil class: Class H
-
Power consumption: 50w
-
Tolerance for power supply: -15% ~ +10%
-
Mounting position: flow as narrow, solenoid vertical and upright direction